![]() |
| That's a lot of soup |
YES! Let us call the height of the bike b, the radius of the regular-sized can of soup r, and then height of the regular-sized can of soup h. We'll call the radius of the water-tank R, and its height will be H.
We know that the water tank is a scaled-up version of the normal can, so r is proportional to R, and h is proportional to H:
R/r = H/h
From looking at the picture we can see that the diameter of the tank looks to be about 2 and a half times the height of the bike, so let us say..
2R = 2.5b -> R = 1.25b
Now using the ratio that we found above, we know that H = h * R / r = h *1.25b / r
Therefore the volume of the tank will be R*R*H or
V = (1.25b) * (1.25b) * (h * 1.25b / r) = 1.25^3 * b^3 * h / r
V = 1.25^3 * b^3 * h / r
Now if we figure some numbers here... let's say the bike is 1m tall, and the original can has a radius of 4cm and a height of 12cm we can get our volume for the tank.
V = 1.25^3 * (1m)^3 * (0.12)/(0.04)
V = 1.953 * 1m^3 * 3
V = about 6m^3 or equivalently about 6000L!
A typical fire truck carries between 1500L and 2000L of water on board for emergencies, so I think this tank should be able to handle most house fires.

Good research and reasoning, Fraser. Just one thing: you left out pi in your volume formula! Volume of a cylinder is pi R^2 H, so your result is too small by a factor of about 3. (Also, according to my sources at least, it takes about 15,000-30,000 gallons of water to put out a serious house fire, so you'd need more than one tank to do that...)
ReplyDeleteOh my! I can't believe I messed that up. I wrote it late at night (9:30 is late for me), but that's an awful mistake
ReplyDelete